During charging the indicator lights will flash. The number of solid
indicator lights indicates the battery’s capacity of the product. Full
indicator lights are solid when it is fully charged.
Charging for Jump Starter itself:
1. Plug the home adaptor into the universal socket
2. Connect 5V 1A input port of Jump Starter to the end of home adaptor
Or.
1.Plug the car adaptor input the socket of cigarette lighter
2.Connect 5V 1A into port of Jump Starter to the end of car adaptor
Power button and power indication instructions
(1) Press the power button 1x, check the balance power and start
the product.
(2) Press the power button 3 seconds to start the LED.
(3) Power Indicator Light ➔ Press the power button. Then the power
indicator lights are on. ➔ 4 LEDs are lighting in BLUE, balance
power is about 100% ➔ 3 LEDs are lighting in BLUE and 1 LED
is OFF, balance power is about 75% (From this capacity status
To Next Page
Loading...