Set photo number
of continuous
shooting
Camera will take photos continuously
Options: [1 photo] (default) / [2 photos in series] /
[3 photos in series].
Select and press OK button to confirm.
Photo Resolution: Set the image resolution: the bigger the resolution the
higher the sharpness! (It will take bigger space either.)
[12MP (4000x3000)] / [8MP (3264x2448)] / [5MP (2592x1944)] (default) /
[3MP (2048x1536)] / [1MP (1280x960).
Select and press OK button to confirm.
Video Resolution: [1920x1080] / [1280x720] (default) / [720x480] / [640x480]
/ [320x240]. Select and press OK button to confirm.
Set the video resolution: the bigger the resolution the shorter the recording
time.
TL-Video Resolution: Set the resolution for the Time Lapse [2592x1944] /
[2048x1536] and press OK button to confirm.
Video length / Audio recording
Set the duration of recording a video clip shortest time is 3
sec. / longest time is 10 min.
Options: 3 sec. – 10 min. (default is 30 sec.)
Select and press OK button to confirm.
Open this function camera will record audio when
recording video.
Options: [On] (default) / [Off].
Select and press OK button to confirm.
Shot Lag: 5 sec. – 60 min. Select and press OK to confirm.
“Short Lag” is the time between the current video and the next video. Set the
time of delay shooting when the camera detects the motion. Within the
selected time, the camera will not record any image or video. It can avoid
storing too much of the same event and saving more storage. (Default is 5
seconds.)
IR Distance: (set the distance of infrared induction): [Near] / [Middle] (default)
/ [Far]. Select and press OK button to confirm.
Note: Maybe you have to adjust the right option for your personal use.
To Next Page
Loading...
General