Techni Mobili RTA-3805L

Need help?

Do you have a question about the Techni Mobili RTA-3805L and is the answer not in the manual?

Summary

Assembly Instructions

General Information

Read instructions carefully, retain packaging, and note potential need for two people.

Parts and Hardware Identification

Lists and illustrates all main parts, screws, and hardware required for assembly.

Pre-Assembly Tips and Warnings

Provides essential guidance on inventory, screw handling, hole location, and customer service.

Install Glide Studs

Insert glide studs G into the bottom of all structures A.

Attach Support Structures

Connect support structures B between main structures A using screws H loosely.

Install Horizontal Tubes (Left Side)

Attach horizontal tubes C to structure A using screws I on the left and with corner structure D using screws J on the right.

Install Horizontal Tubes (Right Side)

Attach horizontal tubes C to structure A using screws I on the right and with corner structure D using screws J on the left.

Attach Glass Tops

Place and secure corner glass E and main glasses F onto the frame using screws L and K respectively.

Final Tightening and Leveling

Tighten all screws and adjust glide studs to ensure proper leveling and alignment of glasses.

Care and Maintenance

Weight Limits

Information on the maximum weight capacity for different parts of the unit.

Cleaning and Handling

Guidelines for cleaning surfaces, avoiding damage, and safe handling during movement.

Tempered Glass Safety

Safety features of tempered glass and procedures for handling breakage.

Warranty Information

Limited Warranty Terms

Details the 5-year warranty for desks, covering defects in workmanship and materials.

Warranty Exclusions

Excludes damage from misuse, commercial use, modifications, and normal wear and tear.

Warranty Claim Procedure

Outlines steps to claim warranty, including contacting customer service and sending parts.

Support and Contact

Online Resources

Visit www.technimobili.com and click the Support tab for help and replacement parts.

Email Support

Contact support@rtaproducts.com for assistance or replacement parts orders.

This document provides assembly instructions and product information for the RTA-3805L desk, manufactured by Techni Mobili. The RTA-3805L is a corner desk designed for office and home-office use, featuring a main structure, support structures, horizontal tubes, and a corner structure, all topped with glass surfaces. The desk's design incorporates an "X" shaped leg structure for stability and aesthetic appeal.

Function Description:

The RTA-3805L is a corner desk designed to provide a functional workspace, particularly suitable for maximizing space in a room by fitting into a corner. It serves as a surface for various office tasks, holding items such as computers, documents, and other work-related materials. The desk's multi-part structure allows for a modular assembly, culminating in a cohesive and sturdy workstation.

Important Technical Specifications:

Model Number: RTA-3805L
Main Structure (A): 4 units
Support Structure (B): 2 units
Horizontal Tube (C): 4 units
Corner Structure (D): 1 unit
Corner Glass (E): 1 unit
Main Glass (F): 2 units
Glide Studs (G): 8 units
Screws:
- M6x20mm (H): 8 units
- M6x40mm (I): 4 units
- M6x60mm (J): 4 units
- M6x23mm (K): 8 units
- M6x8mm (L): 4 units
- M6 (M - wrench): 1 unit
Weight Limits:
- Main Glass (A): 110 Lbs. (50 Kg)
- Corner Glass (B): 66 Lbs. (30 Kg)
Assembly Requirement: Might require two people.
Warranty:
- Desks/Laptop Carts/File Cabinets: Limited 5-Year Warranty
- TV Stand/Entertainment Center: 2 Year Warranty

Usage Features:

Corner Design: Optimized for placement in room corners, saving space and providing an ergonomic workspace layout.
Glass Surfaces: The desk features glass tops (corner glass and main glass) which provide a sleek, modern aesthetic and are generally easy to clean. The glass is safety tempered, designed to shatter into small, less harmful pieces if broken.
Sturdy Construction: The combination of main structures, support structures, and horizontal tubes, secured with various screws, ensures a stable and durable desk.
Adjustable Leveling: The glide studs (G) at the bottom of the main structures allow for minor adjustments to level the desk, which is particularly useful for uneven floors or to align the glass surfaces. Adjusting the innermost glide studs can help level the glasses.
Modular Assembly: The desk is assembled from multiple distinct parts, allowing for a structured and manageable setup process.
Two-Person Assembly Recommended: Due to the size and weight of some components, especially when handling glass tops and aligning structures, assistance from another person is recommended for easier and safer assembly.

Maintenance Features:

Cleaning: Surfaces should be cleaned with a clean cloth dampened in a solution of mild soap and water, then dried with a clean towel.
Avoid Harsh Cleaners: Do not use solvents or abrasive materials to clean the unit, as these can damage the surfaces. If using a cleaning agent, test it on an inconspicuous area first.
Environmental Protection: Avoid exposing the surfaces to direct sunlight or extreme environmental conditions, especially for PVC Laminate surfaces (though this desk features glass, it's a general warning from the manufacturer that applies to other products).
Weight Limits Adherence: Do not exceed the specified weight limits for the main and corner glass surfaces to prevent damage or injury.
Proper Handling:
- Do not sit on or lean against the unit.
- Do not allow small children to play under or over the unit.
- When moving the unit, it must be lifted by at least two persons (preferably three, with one at each end and one holding the corner) and not pulled, pushed, or dragged.
- Before moving, secure or remove any heavy or unstable objects from the desk.
- When lifting, use proper lifting techniques (bend knees, not back).
- Protect and secure the unit during long-distance transport to prevent damage.
Glass Breakage Protocol: In case of glass breakage, do not handle pieces with bare hands. Take pictures and contact Customer Service immediately.
Warranty Support: Replacement parts may be available at no charge during the warranty period for defective parts. The warranty covers defects in workmanship and materials under normal use but excludes damage from abuse, misuse, commercial use, modifications, or failure to heed warnings.
Customer Service: For assembly issues, clarifications, or warranty claims, customers can contact Techni Mobili Customer Service via phone, email, or by visiting their website. The manual provides specific contact details and procedures for warranty claims, including the need to provide model number, date, and place of purchase.