Techni Mobili RTA-M101 User Manual

ASSEMBLY INSTRUCTIONS FOR CHAIR MODEL
RTA-M101
PARTS LIST
ATTENTION: Before you begin the assembly, make sure
that all parts are included in good condition.
ATTENTION:
⚠ Follow the instructions step by step.
⚠ To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
⚠ Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
⚠ Using the wrong size of screws on a part could result in damage to the screw or the part.
6
A
Backrest, x1
B
Seat, x1
C
Backrest
Support, x1
D
Mechanism,
x1
E
Hydraulic
Gas Lift, x1
F
Covers for
Gas Lift,
x1 set
G
Star Base,
x1
H
Caster, x5
1
6x16mm,
x4
2
6x25mm,
x2
3
3B: Metal Bracket
4
Screw Knob
x1
5
8x20mm
x1
6
Allen
wrench, x1
STEP 1
Insert the casters (F) into the legs of the
base (C) using pressure, then place
the gas lift (E) in the middle of the base,
and cover it with (H) as shown.
STEP 2
With the seat positioned as shown,
assemble the mechanism (D) to the seat
(B) using screws (1) as shown. The handle
will be located on the RIGHT when the
chair is finished.
STEP 3
Assemble the support (G) to the
backrest (A) using the cover set (3)
and screws (2) as shown.
STEP 4
Secure the support (G) to the
mechanism (D) using screw knob (4)
and screw (5) as shown.
STEP 5
Place the top over the base, making
sure the tip of the gas lift enters into
the hole of the mechanism.
Make sure that
all the screws
are tightened
before you sit
on the chair for
the first time.
Back cover,
x1 SET
3A: Plastic cover
1
D
B
A
G
3B
2
NOTE:
3A
3B
G

Techni Mobili RTA-M101 Specifications

General

Brand	Techni Mobili
Model	RTA-M101
Category	Indoor Furnishing
Language	English

Summary

Parts and Hardware Identification

Chair Components

Lists and identifies all major parts of the chair for assembly, such as backrest, seat, and base.

Fasteners and Tools

Details the screws, knobs, and Allen wrench required for the assembly process.

Chair Assembly Instructions

Step 1: Base and Gas Lift Assembly

Insert casters into the base and position the gas lift, covering it as shown.

Step 2: Attach Seat Mechanism

Connect the chair mechanism to the seat, noting handle placement.

Step 3: Connect Backrest Support

Assemble the backrest support to the backrest using the cover set and screws.

Step 4: Link Support to Mechanism

Secure the backrest support assembly to the chair mechanism.

Step 5: Final Seat Placement

Place the assembled seat onto the base, aligning the gas lift into the mechanism.

Pre-Use Tightening Check

Verify all screws are tightened before the first use to ensure stability and safety.

Chair Functions and Operation

Height Adjustment Guide

Instructions on how to raise or lower the chair's height using the lever.

Safety and Usage Warnings

General Safety Precautions

Important warnings regarding safe use, load limits, and child supervision.

Care and Maintenance Guidelines

Cleaning and Material Care

Recommendations for cleaning the chair and avoiding damaging materials.

Periodic Inspection

Guidelines for regular checks, including tightening screws every four months.