To Next PageTo Next Page
Need help?Do you have a question about the Technibel CWX3B5XAB and is the answer not in the manual?
General technical data including performance, features, dimensions, and weight.
Details of the main control board, including part number and controls.
Specifications for the wireless remote control receiver.
Technical data for the fan motor, including type, speed, and resistance.
Specifications for the flap motor used for air direction control.
Information on the heat exchanger coil, including material and fin pitch.
Resistance values for the coil sensor thermistor at a specific temperature.
Specifications for the room sensor thermistor.
Details on the drain pump, including model, rating, and capacity.
Information on the safety float switch, including model and contact rating.
Dimensional drawings and connection points for CWX3B5XAB and CWX5B5XAB models.
Dimensional drawings and connection points for the CWX6B5XAB model.
Dimensional drawings and connection points for CWX8B5XAB and CWX10B5XAB models.
Schematic diagrams illustrating electrical connections for different unit models.
Details on jumper locations and DIP switch settings on the PCB.
Pre-defined system configurations based on jumper settings.
Description of the input contact's function and its effect on system operation.
Explanation of the output contact for signaling alarm conditions.
Steps to set the indoor unit address using dip-switches.
Steps to set the remote control address using dip-switches.
Description of the cooling mode operation, including fan speed control.
Explanation of the heating mode operation and its control parameters.
How the unit automatically switches between cooling and heating modes.
Details on the dry mode for moisture removal and its control logic.
Operation of the fan-only mode and available speed selections.
How fan speed automatically adjusts based on temperature differences.
Explanation of the forced mode with fixed cooling or heating settings.
Protection features in heating mode, like cold draft prevention.
Feature to prevent high pressure buildup in the heat exchanger during heating.
Functionality of the I FEEL feature for personalized temperature sensing.
How room temperature adjusts automatically for sleeping comfort.
Operation of the unit's drain pump and overflow detection.
Visual indicators (LEDs) for system troubles and their meanings.
Method for measuring insulation resistance of wires and parts.
Steps to check the continuity of fuses on the PCB assembly.
General technical data including performance, features, dimensions, and weight.
Details of the main control board, including part number and controls.
Specifications for the wireless remote control receiver.
Technical data for the fan motor, including type, speed, and resistance.
Specifications for the flap motor used for air direction control.
Information on the heat exchanger coil, including material and fin pitch.
Resistance values for the coil sensor thermistor at a specific temperature.
Specifications for the room sensor thermistor.
Details on the drain pump, including model, rating, and capacity.
Information on the safety float switch, including model and contact rating.
Dimensional drawings and connection points for CWX3B5XAB and CWX5B5XAB models.
Dimensional drawings and connection points for the CWX6B5XAB model.
Dimensional drawings and connection points for CWX8B5XAB and CWX10B5XAB models.
Schematic diagrams illustrating electrical connections for different unit models.
Details on jumper locations and DIP switch settings on the PCB.
Pre-defined system configurations based on jumper settings.
Description of the input contact's function and its effect on system operation.
Explanation of the output contact for signaling alarm conditions.
Steps to set the indoor unit address using dip-switches.
Steps to set the remote control address using dip-switches.
Description of the cooling mode operation, including fan speed control.
Explanation of the heating mode operation and its control parameters.
How the unit automatically switches between cooling and heating modes.
Details on the dry mode for moisture removal and its control logic.
Operation of the fan-only mode and available speed selections.
How fan speed automatically adjusts based on temperature differences.
Explanation of the forced mode with fixed cooling or heating settings.
Protection features in heating mode, like cold draft prevention.
Feature to prevent high pressure buildup in the heat exchanger during heating.
Functionality of the I FEEL feature for personalized temperature sensing.
How room temperature adjusts automatically for sleeping comfort.
Operation of the unit's drain pump and overflow detection.
Visual indicators (LEDs) for system troubles and their meanings.
Method for measuring insulation resistance of wires and parts.
Steps to check the continuity of fuses on the PCB assembly.
General| Brand | Technibel |
|---|---|
| Model | CWX3B5XAB |
| Category | Air Conditioner |
| Language | English |
