137
PART 6 – MAINTENANCE
CONTROLLER & PARAMETERS
WARNING: Before carrying out any work on the machine, make sure that its power supply is switched off and
the access to it is prevented. Any work must be carried out by personnel qualified and authorized to work on
this type of machine.
6.1 Presentation
6.2 Standard display and settings – Connection to A2 control board
6.2.1 Remote control connection
6.2.2 Current display
6.2.3 Alarm history display
6.2.4 Values display for monitoring
6.2.5 Parameters
6.2.6 Heat pump control – Stand alone
6.3 Advanced display and settings – Connection to A3 control board
6.3.1 Remote control connection
6.3.2 Current display
6.3.3 Alarm history display
6.3.4 Values display for monitoring
6.3.5 Parameters
To Next Page
Loading...
