Playing Audio from the USB / TF Inputs
After following the steps above to connect a USB / TF see the details below for tips on using these inputs.
Press and hold down the Previous Track button to rewind within the current track on the USB and TF inputs
Press and hold down the Next Track button to fast forward within the current track of the USB and TF inputs
Use the Master Level knob to increase or decrease the volume of the all Stereo inputs (AUX, USB, TF)
When playing audio from the USB / TF inputs press the play/pause, previous and next track buttons to control the
audio.
Press the Previous Track button to move to the previous track when using the USB / TF inputs
Press the Next Track button to advance to the next track when using the USB / TF inputs
DJPACK2GO
To Next Page
Loading...
