Technicolor MediaAccess TG389ac

1. Before you start
Carefully read the Safety Instructions and Regulatory Notices booklet included in the box before
continuing with the installation of the MediaAccess Gateway.
2. Check the content of your box
B C
E
F
A
D
QUICK INSTALLATION GUIDE
MediaAccess TG389ac
Your box contains the following items:
Item Description
A One MediaAccess TG389ac.
In this document we will refer to it as MediaAccess Gateway.
B This Quick Installation Guide.
C One Safety Instructions and Regulatory Information booklet.
D One power adapter.
E One Ethernet cable with yellow connectors.
F One Ethernet cable with red connectors.

Technicolor MediaAccess TG389ac Specifications

General

Brand	Technicolor
Model	MediaAccess TG389ac
Category	Gateway
Language	English

Summary

Before You Start

Check Box Contents

Install Your MediaAccess Gateway

Connect to Internet Access Device

Connect the WAN port to the Internet Access Device using the red Ethernet cable.

Power On the Gateway

Plug in the power adapter and press the power button. Check LED status.

Connect Wired Devices

Connect wired devices using the yellow Ethernet cable.

Connect Telephones

Connect corded phones, DECT base stations, or faxes to green ports.

Connect Wireless Devices

Connect wireless devices using 2.4 GHz or 5 GHz access points via WPS or manually.

Configure Gateway from Browser