Need help?Do you have a question about the Technicolor MediaAccess TG789vn and is the answer not in the manual?
General| Device Type | Gateway |
|---|---|
| Manufacturer | Technicolor |
| Model | TG789vn |
| Wi-Fi Standards | 802.11b/g/n |
| Wi-Fi Frequency Bands | 2.4 GHz |
| USB Ports | 1 x USB 2.0 |
| VoIP | Yes |
| Firewall | Yes |
| DSL Standards | ADSL2+, VDSL2 |
| Telephone Ports | 2 |
| Security Features | WPA, WPA2 |
| Power Supply | 12V DC |
Describes the DSL and WAN ports for connecting to the internet.
Lists requirements and preparations needed before installing the gateway.
Guides connection to the service provider's network for DSL or Local Router setups.
Details connecting the gateway as a DSL gateway, including filter use.
Guides connection as a Local Router using the WAN port.
Step-by-step procedure to power on the gateway.
Instructions for connecting computers and other devices via wired or wireless methods.
Details on establishing a wireless connection, including supported standards.
Instructions for establishing a wired connection using an Ethernet cable.
Guide to configuring the gateway via its Graphical User Interface (GUI).
How to set up a 3G connection as a backup for the main internet connection.
Managing mobile connection parameters through the gateway's GUI.
Procedure for inserting and detecting a mobile USB adapter.
Using the Graphical User Interface (GUI) for gateway configuration via a web browser.
How to access the MediaAccess Gateway GUI using a web browser or UPnP.
Procedures for backing up and restoring the gateway's configuration settings.
Solutions for common problems encountered during the gateway setup process.
Troubleshooting for general gateway operation, LEDs, and reachability issues.
Troubleshooting issues related to wired Ethernet connections, such as the Ethernet LED.
Troubleshooting problems with wireless connectivity, range, and WPS connections.
Troubleshooting issues related to making or receiving VoIP phone calls.
Procedures for resetting the MediaAccess Gateway to its original factory default settings.
To Next Page