Technicolor MediaAccess TG789vn - Setting up Your Telephone Network

52
6 TELEPHONY
DMS-CTC-20101206-0033 v1.0
6.1 Setting Up Your Telephone Network
Procedure
To set up your telephone network, follow these steps:
1 Connect your traditional phone(s), DECT base station or fax to the green Phone port(s) on the back panel of your
MediaAccess Gateway.
2 Connect your MediaAccess Gateway to the traditional network.
For more information, see “6.1.1 Connection to the Traditional Telephone Network” on page 53.
3 Configure the VoIP service on your MediaAccess Gateway.
For more information, see “6.1.2 Configuring the MediaAccess Gateway VoIP Service” on page 54.