Technicolor TG588 Self-Install Guide

5
How to set up your router
1
4
3
1. Connect the power supply to the power socket on your router and into
an electrical mains socket.
2. Connect the grey cable into the grey DSL port on the router, plugging the
other end into the modem or DSL port of the lter. Then, plug the lter
into your phone socket and your home phone into the phone port of the
lter.
3. Connect devices directly into your router using the yellow cable. Plug
one end into one of the yellow sockets on your router and the other into
the network port of your device. Or, to connect your devices wirelessly,
simply follow the instructions on page 7.
4. Press the power button on your router. The router lights will icker
briey while the broadband is activating.
2
Setup 2

Technicolor TG588 Specifications

General

Brand	Technicolor
Model	TG588
Category	Wireless Router
Language	English