7
How to connect your devices
To connect your devices via Wi-Fi
To connect your internet-enabled devices such as smartphones, laptops,
tablets, smart TVs and games consoles to the Wi-Fi network, please follow the
steps below:
1. Make a note of your network name and wireless key. These can be found
on the sticker on the bottom of your router, and on a plastic card which
came in the box along with your router.
2. Search for the network name on your device.
3. Once you have found the right network and selected it, you will be
prompted for a password or security key – this is your wireless key.
4. Enter your wireless key and you should be connected to your home Wi-Fi
network.
Technicolor Gateway Wireless Settings
Details to set up a wireless connection
to your Tecnicolor Gateway
Network Name TNCAPEXXXXX
WPA Key XXXXXXXXXX
WPS PIN XXXX-XXXX
Serial Number CPXXXXXXXXX
Router Admin 192.168.1.1
Access Key 5GXXXXXX
If you are not sure how to connect your devices to the Wi-Fi connection,
please consult the user manual for your device or operating system (e.g.
Windows, Mac).
To Next Page
Loading...
