Technicolor TG588 Self-Install Guide

8
How to connect your devices
To use WPS
Alternatively, if you have a WPS (Wi-Fi Protected Setup) enabled device and
would like to connect to Wi-Fi using WPS, please follow the steps below:
1. Use the Settings option of your device to enable WPS.
2. Press the WPS button located at the front, towards the right-hand side of
the router.
3. Wait until the WPS light on the front of the router is green.
4. Your device will connect automatically to the router.

Technicolor TG588 Specifications

General

Brand	Technicolor
Model	TG588
Category	Wireless Router
Language	English