Technicolor UCW4026MCS - Admin Settings

Page 14
3 Admin Settings
To access the UCW4026MCS Admin Settings, use the remote control to press and hold the
Reverse (<<) and GUIDE buttons simultaneously for 4 seconds (Figure 10 - Remote Control) to
display the pin entry screen (Figure 11 – Admin Settings Pin Entry):
Using the remote, enter the pin to access Admin Settings. The default pin from the factory is
75309. The Admin Settings menu will then be displayed as shown in Figure 12 – Admin
Settings.
Figure 10 - Remote Control
Hold Reverse+GUIDE for 4 seconds
to access Admin Settings.
Figure 11 – Admin Settings Pin Entry