Technicolor UCW4026MCS - Set up CONFIG.XML

Page 8
1.5 Set up CONFIG.XML
The CONFIG.XML file is used to send global information to a wide set of devices that are
connected to the COM51. This includes network configuration data, device settings and
software updates. The CONFIG.XML file also transmits the PIM key from the COM51 to the
devices so that each device can playback video content. Without a CONFIG.XML file, PIM
encrypted content is not viewable.
Navigate to the Android tab on the COM51 interface as shown in below in Figure 4 - Android
Config.
Figure 4 - Android Config
To set up a basic CONFIG.XML on the system, enter the text below in the config.xml as shown
in Figure 5 - Android Config.xml.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system>
</system>
</configuration>
Press Submit
Figure 5 - Android Config.xml