Technics DC SERVO SL-BD20D - Page 2

Operation
|
45-rpm
adaptor
Tonearm
Note:
Do not try to clean the dust cover
while a disc is playing, because static
Arm rest electricity might cause the tonearm to
rise.
The unit is in the standby condition
when the AC power supply cord is con-
nected.
The primary circuit is always “live” as
jong as the power cord is connected to
an electrical outlet.
Set to “ 7" to stop the play temporarily.
Set to “ ¥" to resume the play.
Stop switch
__
Press
to
stop
the
play.
ry
Remove
the
"e)
é
™“F
stylus
protector.
Set
to
“2”,
(The
tape
on
side
of
cartridge prevents the
stylus assembly from
shaking loose during
shipment.) Protector
epee |
| Cartridge
2? | Speed selector
Move to the desired position.
Set
to
disc's
speed.
(The
platter
will
start
turning.)
(TP) is the standard mark for the “P-mount™ plug-in con-
nector system. Products carrying this mark are interchange-
able and compatible with each other.
Setto“ yz”.
1
Place
a
disc
on
the
platter
mat.
{Play
will
start.)
@
Fora
17-cm
(7”)
(large
center
hole)
disc
@ When play ends
1. The tonearm will automatically return to the arm rest (the
automatic return feature).
2. Rotation will stop.
Disc
———
)—.
—-_45-rpm
adaptor
2 TEER ES