Technics DC SERVO SL-BD20D - Turntable Assembly

Accessories
Platter mat (1) AC power supply cord (1} Stereo connection cable (1} . Ground wire (1) 45-rpm adaptor (1)
Turntable Assembly
1. Remove the packing spacers. 3. Place the platter mat on the piatter, and turn
the platter about ten times clockwise.
Turn to left , ;
whe (2 pieces).
z rate $$ D
Remove.
tial
Platter ; ase
‘ {This sets the rotation
mechanism to the
correct position.)
C tl
; To household AC outlet,
AC
power
supply
cord
(included)
Si
or
AC
outlet
on
amplifier
|
(RJiLHGND}
ie Ground wire (included)
‘ If the ground wire is not connected.
a “hum” nose may be heard.
Stereo connection cable (included)