To Next PageTo Next Page
Need help?Do you have a question about the Technics SA-101 and is the answer not in the manual?
General| Power output | 12 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency response | 20Hz to 20kHz |
| Total harmonic distortion | 0.9% |
| Damping factor | 30 |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Dimensions | 430 x 142 x 247mm |
| Weight | 5.2kg |
| Tuning range | FM, MW |
| Channel separation | 50dB (line) |
| Signal-to-Noise Ratio | 78dB (line) |
Service should only be performed by qualified technicians to avoid hazards.
Instructions on finding the unit's serial number for identification and records.
Do not expose the product to rain or moisture to prevent fire or shock.
Detailed performance metrics for the amplifier section across models SA-303, SA-202, SA-101.
Performance metrics for the FM tuner section across models SA-303, SA-202, SA-101.
Performance metrics for the AM tuner section across models SA-303, SA-202, SA-101.
Details on power, dimensions, and weight for all models.
Use ordinary household AC power; avoid high-voltage sources.
Do not use a DC power source; check carefully before use.
Avoid wet hands and do not pull the cord itself, only the plug.
Use rear AC outlet for low-power audio equipment only.
Never attempt to repair or reconstruct the unit yourself.
Keep children away and prevent insertion of foreign objects.
Turn off the unit when not in use to prolong life and prevent issues.
Disconnect immediately if water spills and consult dealer.
Place unit in a well-ventilated area, away from direct sunlight.
Keep unit away from stoves and heat sources to prevent damage.
Avoid spray-type insecticides which can damage surfaces.
Do not use alcohol or paint thinner as they may damage the finish.
Disconnect and contact dealer for abnormal odor, smoke, or function loss.
Fuses protect speakers from damage due to short circuits or low impedance.
Instructions on how to replace the speaker circuit protection fuses.
Proper procedure for stripping and connecting speaker wires securely.
Diagram and instructions for connecting FM outdoor antennas.
Wiring diagram for connecting a record player to the unit.
Instructions for connecting a second pair of speakers.
Diagram showing how to connect a cassette tape deck.
Advice on positioning the antenna for optimal FM reception.
Instructions for deploying and mounting the included indoor FM antenna.
Information regarding AUX terminals for tape decks or tuners.
Step-by-step guide for playing records using the turntable.
Instructions for using headphones with the unit.
Guide for connecting and listening to devices via the AUX input.
Steps for tuning into FM and AM radio stations.
Instructions for playing audio from a cassette tape.
Guide for recording tapes and monitoring sound during recording.
Explanation of power indicators and FM tuning/signal strength indicators.
How to use the tuning control and input selector.
Controls for selecting speakers and using the headphone jack.
Adjustments for FM muting and the loudness control.
How to adjust bass, treble, and left/right balance.
