Technics SA-AX730

Basic operations
POWER
SA-AX730
A
SPEAKERS B
ISA-AX530I
SPEAKERS
INPUT SELECTOR
VOLUME
VOLUME
SPEAKERS
a
on)
/ //
/ //
Selected source
Before operation, set VOLUME to the "MIN" position.
Press [POWER].
SA-AX730
Press [A] and/or [B] to select the speaker
system(s) to be used.
A and B refer to the speaker
terminals
at
the rear of the
unit.
ISA-AX530I
Press [SPEAKERS] and check the
"SPEAKERS" indication lights up.
If the button
is pressed
once more, the indicator will switch
off and no sound
will
be
heard from
the
speakers.
Turn [INPUT SELECTOR] to select
and
start
the desired source.
(Refer to the appropriate operating instructions for details.)
The
indicator
which
corresponds to
the selected input source
will
illuminate.
The selected source will be shown on the
display.
TAPE (MONITOR): To listen to cassette tapes
VCR: To
watch video
tapes
TV/DSS: To watch TV or DSS
DVD: To
watch
DVD
CD: To listen to compact
discs
TUNER: To
listen
to
radio broadcasts
PHONO:
To
listen
to phono
discs
If
a
Dolby Pro Logic or SFC mode
has been
selected
After
displaying the selected source, the display will then
change
to
show
the
Dolby
Pro Logic
or
SFC mode.
If
the source
chosen was TUNER then the display
will
change again to
show the frequency.
To watch a video
(or
DVD)
or
the TV, set the TV to either the
TV mode or
VIDEO
mode.
For your reference
If you are
using
a
VCR and you select TAPE, CD,
TUNER,
or PHONO, the picture will remain on the screen.
il
Adjust
the volume.
When
you
finish listening
Be sure to reduce the volume
level,
and
switch the power to the
standby
condition
by
pressing [POWER].