Need help?Do you have a question about the Technics SA-AX540 and is the answer not in the manual?
General| Tuning Range | FM, MW |
|---|---|
| Damping Factor | 30 |
| Input Sensitivity | 150mV (line) |
| Power Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.9% THD) |
| Impedance | 8 ohms |
| Dimensions | 430 x 158 x 370mm |
| Speaker Load Impedance | 8Ω to 16Ω |
| Video Connections | Composite Video |
Covers power source, polarization, cord protection, and nonuse guidelines for the unit.
Details environment, placement, ventilation, and foreign material concerns for proper installation.
Outlines cleaning procedures, service requirements, and when to contact qualified personnel.
Illustrates how to connect turntables, CD players, and tape decks to the receiver.
Shows the process of connecting TVs and VCRs to the receiver for audio and video.
Provides guidance on optimal positioning for front, center, and surround speakers for best audio.
Details how to connect speaker cables to the receiver terminals, including impedance considerations.
Explains how to tune radio stations using the tuning buttons and band selection.
Enhances sound with depth and movement, simulating a theater experience for Dolby Surround sources.
Delivers clear sound, presence, and orientation for audio/video sources, usable with stereo sources.
Adds presence and spread to music/movies, simulating various acoustic environments.
Allows adjustment of low frequencies with BASS and high frequencies with TREBLE controls.
Controls the left/right sound balance of the audio output using the BALANCE knob.
Temporarily silences the audio output by pressing the MUTING button.
Guides on connecting headphones, reducing volume, and adjusting settings for headphone listening.
Instructions for selecting a source and beginning a recording on a connected tape deck.
Steps to select a source and start recording video content onto a VCR.
To Next Page
