Technics SA-AX730

Listening to
radio
broadcasts
Preset tuning
Presetting
radio
stations
into the
memory
channels of this unit
makes selecting stations simple.
A
total
of 30 FM and
AM
stations can be preset.
Please remember this
If
a new
broadcast station
is preset
into
a channel,
the
setting
for
the broadcast station
which
was
previously
entered in
that
channel
will
be automatically
erased.
Automatic memory presetting
Automatic memory presetting allows this unit
to
automatically
search for
broadcast
stations
and
then
preset them into memory.
With this
method,
the channels
that
can be
preset into
the memory
are set as follows
for different
bands
(FM
or AM).
When
FM stations are preset,
For FM
stations
1-30
When FM and
AM
stations
are
preset,
For
FM stations
1-20
For AM stations
21-30
H
Set to the
frequency
from
which
you
want to
start
automatic
memory
presetting.
(^Page
18-19.)
B
Press [MEMORY]
until
the frequency begins
to change.
(Automatic memory presetting will start.)
During
automatic
memory
presetting,
the
memory indicator
will flash
while
the frequency
scrolls.
To stop,
press
[MEMORY] once again.
When
a
broadcast station
is
preset
El
The memory indicator and the
preset
channel
number
will
be
displayed for approximately 1
second.
When presetting
is completed
The last
broadcast
station
to be preset
will
be displayed.
Frequencies
may
not
be
preset
correctly
in cases
where
the
broadcast waves
are too strong
or too
weak. In
such
cases, carry
out presetting
manually.
(^
Page
21.)