Technics SA-AX730

SFC
(Sound Field
Control)
-
DOLBY PftOLOGIC-
STEREO
SURROUND 3 STEREO SFC
O O O -O-
O)
3
MODE
I I
V I
Selected
SFC mode
The
SFC function
gives
presence
and spread thereby
enhancing
and enriching the
music
or movie.
Read the
following explanations
in order to better
understand
how
to make your
selection.
The center
speaker is not
used in the hall,
and
simulated modes.
HALL
This
mode imparts a reflection
and spread which will
make you
feel as if
you
are in
a large concert hall.
CLUB
Like a
jazz club, this
mode provides
an exciting
and intimate
atmosphere.
It simulates
the sound field
of
a
relatively
small room
having a low
ceiling
and hard reflective
surfaces,
for a "live" sound
with
enhanced
presence
to
bring
the performers
up close.
LIVE
Primarily for
vocal pieces,
this mode
adds gloss
to the vocals and
you'll
feel as though
you
were
hearing
a live stage performance.
THEATER
You can clearly
perceive
the directions and
source
of the movie.
Real ambience
of
sound can also be recreated
naturally
using this
mode.
THEATER
mode can
be used with stereo
sources
not encoded
with Dolby
Surround.
I?HEI
When using
Dolby Surround
encoded materials,
select
"SURROUND".
SIMULATED
(SIM
SURR)
Choose this
mode
if
little
or no sound will
be
heard
from the
surround
speakers.
You can feel as if you were in
a
more
expanded space
adding
to
the
actual
sound from the source.
This mode also
adds effect
to monaural sources
by
outputting
sound from surround speakers.
Turn
[INPUT
SELECTOR]
to select and
start
the
desired
source.
E
Turn
the sound
mode
selector to select
"SFC".
B
Turn
[MODE] to select the desired
SFC
mode.
The SFC
mode can also
be selected by
directly
turning [MODE] in
step 2 instead of
selecting "SFC".
For
your reference
You can set the
SFC mode for
each source.
Each
source
will
retain the
selected mode.
To
turn
off
the SFC function
Turn the
sound
mode selector
(®)
to select "STEREO".
SA-AX730 only
Ensure
the front
speakers
are connected
to
the A
terminals when
you use SFC.
The SFC
modes
cannot
be
turned
on if
"SPEAKERS
B"
is
selected.