Technics SA-EX300 - Operation Checks and Component Replacement; PCB Operation Checks

No. Name Ref. page
@ Power “STANDBY © /ON” switch 12
(POWER, STANDBY (© /ON)
Press to switch the unit from on to standby mode or vice versa.
in standby mode, the unit is still consuming a small amount of
power.
@® Tuning buttons (TUNING) 14
@ Band select button (BAND) 14
@ FM mode select button (FM AUTO/MONO) 14
® Memory button (MEMORY) 15
@ Preset channel buttons (PRESET) 15,16
@ Remote control signal sensor (SENSOR) -
“STANDBY” indicator (STANDBY) =
When the unit is connected to the AC mains supply, this indica-
tor lights up in standby mode and goes out when the unit is
turned on.
© BSc
Surround button (SURROUND) 17,18,19
© BESeE
3 stereo button (3 STEREO) 17,18,19
No. Name Ref. page
®
Center mode select button
(CENTER MODE) 17
@® Display =
® Muting button (MUTING) 13
@ Volume control (VOLUME) 12
@® Headphones jack (PHONES) 18
{® Speaker button (SPEAKERS) 12
@
Sleep timer button (SLEEP) 22
@ Input select buttons 12
@ Tape monitor button (TAPE MONITOR) 12,20
@ Bass control (BASS) 13
@ Treble control (TREBLE) 18
@ Balance control (BALANCE) 18