Need help?Do you have a question about the Technics SA-EX320 and is the answer not in the manual?
General| Tuning Range | FM, MW |
|---|---|
| Total Harmonic Distortion | 0.08% |
| Signal to Noise Ratio | 80 dB (MM) |
| Speaker Load Impedance | 8Ω to 16Ω |
| Input Sensitivity/Impedance | 2.5mV/47kΩ (MM) |
| Speaker Impedance | 6 Ω - 16 Ω |
Technical specifications for the FM tuner, including frequency range, sensitivity, and distortion.
Details on power output, total harmonic distortion, and frequency response for the amplifier.
Schematic for IC1001, the Pro Logic Decoder, and related components.
Schematic for IC1002, Surround Decoder, and associated control circuitry.
Schematic diagram for the power amplifier section, centered around IC801.
Schematics for the power supply, relay drive, and transformer connections.
List of all transistors with their part numbers and descriptions.
List of all diodes with their part numbers and descriptions.
Detailed list of resistors R103 through R149, including part numbers and values.
Detailed list of resistors R171 through R569, including part numbers and values.
Detailed list of resistors R601 through R985, including part numbers and values.
Detailed list of capacitors C101 through C1068, including part numbers and values.
Detailed list of capacitors C638 through C963, including part numbers and values.
To Next Page
