Need help?Do you have a question about the Technics SA-500 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Tuning Range | FM, MW |
| Damping Factor | 30 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio | 90dB (line) |
Service should only be performed by qualified technicians. No customer service information is provided.
Use standard AC power, avoid high voltage, do not pull the cord, and use dry hands for connection/disconnection.
Do not attempt unauthorized repair, prevent children from inserting objects, and disconnect if water is spilled.
Ensure ventilation, avoid sunlight, heat sources, insecticides, alcohol, and paint thinner to protect the unit.
Disconnect power and consult dealer if sound/lamps fail, or if abnormal odor or smoke is detected.
Details on power output, distortion, and impedance matching for the amplifier section.
Input sensitivity, impedance, and frequency response for the preamplifier section.
To Next Page
