Technics SA-5170 - Service Manual

ORDER NO. SD7706-1237
Service Manual
FM/AM STEREO RECEIVER
SA-5170
(XA), (XAL), (XE), (XGF),
(XSW), (XG), (XGH), (XSD)
SA-5170K
(XGF), (XSW), (XG), (XGH)
(XSD)
* This photo shows only the products for [XA] and [XAL].
* The model SA-5170 (XA) is available in Asia, Latin America,
Middle East and Africa only.
The model SA-5170 (XAL) is available in Australia only.
The model SA-5170 (XE) is available in England only.
The model SA-5170/K(XGF) is available in France only.
The model SA-5170/K (XSW) is available in Switzerland only.
The model SA-5170/K (XG) is available in European only.
The model SA-5170/K (XGH) is available in Holland only.
The model SA-5170/K(XSD) is available in Scandinavia only.
* This photo shows the products for other destinations except [XA] and [XAL].
SA-5170K is different in appearance and colour-tone.
* Cabinet colour differs according to area.
* * KK Kk OK
TECHNICAL SPECIFICATIONS Specifications are subject to change without notice for further improvement.
Input sensitivity and impedance ,
PHONO 2.5 mV/47 kQ.
[DIN 45 500] AUX 150 mV/33 kQO
AMPLIFIER SECTION PLAYBACK, REC/PLAY input 180 mV/39 kQ
1kH 3 PHONO maximum input voltage (1 kHz, RMS) 130 mV
z continuous power
z S/N
20
foe
out
conuniete
sara
Senex
27
W180
rated
power
PHONO
65
dB
(IHF,
A:
78
dB)
: AUX 80 dB (IHF, A: 95dB)
both channels driven 2x 26W (40), 2x 25 W (82) :
40 Hz ~ 16 kHz continuous power mpeg rated aati bea Ee oat Pepe ee ce
both channels driven 2x 26W (40), 2x 25 W (80) Power outpy ONO ‘
Power bandwidth Frequency response PHONO RIAA standard curve + 0.5 dB
both channels driven at 40, 80 7Hz ~50kHz, —3dB nue fas pani eae
Total harmonic distortion ae a
3, Tone controls BASS 50 Hz, +10 dB ~—10dB
rated power at 1 kHz 0.5% (40, 80) TREBLE 10 kHz. +10 dB 10 dB
rated power at 20Hz ~ 20 kHz 0.5% (40, 80) zy Fea
0 Loudness control (volume at —30 dB) 50 Hz,+10dB
rated power at 40 Hz ~ 16 kHz 0.5% (40, 8)
9 Output voltage REC OUT 150 mV
—26 dB rated power at 1 kHz 0.25% (42)
50 mW power at 1 kHz 0.25% (429) REC/PLAY output 30 mv
A A : Channel balance (250Hz ~ 6300Hz) +2.0dB
Intermodulation distortion 4
rated power at 250 Hz: 8000 Hz = 4:1, 40 0.5% Channel separation at 1 kHz _ 55 dB
rated power at 60 Hz: 7 kHz = 4:1, SMPTE, 80 0.5% Headphones level and output impedance 380 mV/3300.
Damping factor 16 (4Q), 32 (8Q) Load impedance MAIN or REMOTE 4~160
‘ MAIN + REMOTE 8~160
lax = Matsushita Electric Trading Co., Ltd.
Technics P.O. Box 288, Central Osaka Japan

Technics SA-5170 Specifications