Need help?Do you have a question about the Technics SA-500 (D) and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Tuning Range | FM, MW |
| Damping Factor | 30 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio | 95dB (line) |
Detailed performance parameters for the audio amplifier stage.
Performance specifications for the FM radio receiver.
Performance specifications for the AM radio receiver.
Overall device specifications including power consumption and dimensions.
Procedure for adjusting the ICQ bias in the main amplifier stage.
Steps for aligning the AM tuner for optimal reception.
Alignment of FM Intermediate Frequency and Radio Frequency stages.
Adjustments for FM mono distortion, muting, signal meter, MPX, and stereo separation.
List of diodes and lamps used in the unit.
List of integrated circuits used in the unit.
List of transistors used in the unit.
List of coils, transformers, and ceramic filters.
List of component combinations used in the unit.
List of thermistors and resistors used in the unit.
List of variable resistors and capacitors used.
List of fuses, relays, and switches used in the unit.
List of capacitors used in the unit.
To Next Page
