If you make a mistake in operation or if sound output stops due to
some operation which was performed, the HELP function
displays characters which can be useful for indicating the
method by which this condition can be remedied.
If "ERROR" or scrolling characters (for instance, "TAPE
MONITOR ON NOW") appears on the display during operation,
carry out the following operation.
- HELP
(3
--RESET
/
D
,,0o.
m .....
Do not attempt to remove the cover(s) or repair the unit yourself.
Refer servicing to qualified personnel only.
Product in£ormation
For product service, product information or assistance with pro-
duct operation, refer to the servicenter directory.
- HELP
Press -HELP momentarily.
The method for remedying this condition will
be displayed.
For your reference:
If the above button is pressed for a longer period until "RESET"
appears on the display, the operation settings for the unit will be
initialized to the settings made at the time of shipment.
However, any broadcasting stations which have been preset into
memory will not be erased at this time.
26
To Next Page