Technics SB-AS40 User Manual

Positioning the Speakers
The diagram below shows the basic positioning of each speaker.
Loud volumes from the speakers may cause them move on some • The subwoofer can be placed in any position as long
floors, In such cases, attach the accessory speaker feet as as it is at a reasonable distance from the TV.
shown in the illustration below. * Do not place any object on top of this unit.
(To prevent damage to the speakers, lay them on top of a soft * Be sure to lay the subwoofer to its longer side as
cloth before attaching the speaker feet.) shown in the picture.
Remove the
backing paper.

Technics SB-AS40 Specifications

Amplifier Section

continuous power output	50 W (4 ft)
input sensitivity/impedance (RCA-type pin-plug Jack)	54 mV/10 kft
input sensitivity/impedance (Push-type terminals)	1.1 V/4.7 kft

Power

power consumption	60 W
power supply	AC 120 V, 60 Hz

Speaker Section

woofer size	17 cm (6-11/16")
impedance	4 ft
frequency range (-16 dB)	32 Hz-350 Hz

General

dimensions (WxHxD)	384 x 284 x 294 mm
dimensions (WxHxD in inches)	15- /a x^'3/i6 x ^'9/ie
weight	8.5 kg (18.7 lb)