1 Remove the accessories.
≥Remove the accessories from the styrofoam blocks, and place them in a location away from children.
2 Place the styrofoam blocks in an area suitable for work.
3 Remove the packaging box of the speaker net.
4 Place the speaker on the styrofoam blocks removed in Step ② .
≥Keep the following points in mind when lifting up the speaker.
jHold the bottom so that your hands do not slip.
Attaching the base plates
Leave the cardboard in place to
protect the speaker unit.
10
(10)
SB-G90_TQBM0081_PPCEBEGGN_mst.book 10 ページ ２０１７年２月１０日 金曜日 午前１０時３９分
To Next Page
