51
Operations
Using digital audio output
device
You can connect a DVD player, etc. with
optical digital audio cable (not supplied) and
play back music.
Optical digital audio
cable
(not supplied)
DVD player, etc.
1 Disconnect the AC power supply cord.
2 Connect this unit and a DVD player etc.
3 Connect the AC power supply cord to
this unit. (⇒ 27)
4 Press [
] to turn this unit on.
5 Press [>SELECT<] repeatedly to select
“OPT”.
6 Start playback on the connected device.
Note
• The digital audio input terminal of this unit can
only detect the following linear PCM signals. For
details, refer to the operating instructions of the
connected device.
Sampling frequency:
32/44.1/48/88.2/96 kHz
Number of quantization bits:
16/24 bit
To Next Page
Loading...
Need help?
General
