88
(Continued)
Auto dimming function
“Auto DIMMER”
While the setting is set to “On”, this unit temporarily
adjust the brightness of the display, power indicator,
etc., if no sound output without operation such as
pressing buttons, etc. for approx. 20 minutes.
• The factory default is “On”.
Illumination on the top cover
“ILLUMINATION”
The top cover illuminates when this unit is turned
on. (The light of top cover turns off when the top
cover is opened.)
• The factory default is “Mode2”. To disable this
function, select “Off”.
Mode1:
The top cover always illuminates.
Mode2:
The top cover illuminates only when a playable CD
is inserted and the input source is “CD”.
Operation sound setting
“Beep”
You can turn the beep sound on/off for the touch
switch operation.
• The factory default is “On”. To disable this
function, select “Off”.
Clock display in standby mode
“Standby Display”
You can set the clock display in standby mode.
On (CLOCK):
Displays the clock in standby mode.
• The clock indicator moves every certain period
of time.
• When the display is turned off by pressing
[DIMMER], the clock is not displayed. (The clock
is displayed for several seconds when pressing
[INFO].)
Off:
No display (The clock is displayed for several
seconds when pressing [INFO].)
• The factory default is “Off”.
To Next Page
Loading...
Need help?
General
