Technics SC-HD510 - Setting the Time and Power Saving; Setting the Time; Saving Power in Standby Mode

Oon
@MODE
-This is a 24-hour clock.
The example shows how to set the clock for Wednesday 16:25
(4:25 pm).
1 Press [dA] to turn the unit on.
2 @Press [CLOCK/TIMER, —DEMO] to
display “CLOCK.”
Each time you press the button:
CLOCK —> @) PLAY —> ©) REC — Original display
®@ Within 7 seconds
Press [SET].
Before use fe
3° @Press [TUNE/TIME ADJUST
(V or /A)] to set the day.
@ Press [SET].
4 @Press [TUNE/TIME ADJUST
(V or A)] to set the time.
@ Press [SET].
The time is set and the original display is restored.
Displaying the clock
Press [CLOCK/TIMER, -DEMO].
The clock is shown for about 5 seconds.
When this mode is turned on, the clock is not displayed when the
unit is in standby mode, thereby reducing standby mode power
consumption from 9 W to 0.8 W. The standby indicator still lights.
Turn DEMO off. ECO does not work when DEMO is on.
Turning ECO on and off:
@Press [ (5 /l] to turn the unit on.
@ Press [MODE].
The current mode is displayed. Press again to change the mode.
Each time you press the button:
NORMAL (off) “= ECO (on)
The mode can be switched to ECO when the unit is off but it can
not be switched back to NORMAL.
11
RQT5296