Do you have a question about the Technics SC-HD510 and is the answer not in the manual?
Type | Mini Hi-Fi System |
---|---|
CD Player | Yes |
Tuner | FM/AM |
Weight | 4.3 kg |
Frequency Response | 20Hz-20kHz |
Power Supply | AC 220-240V, 50/60Hz |
USB Port | No |
Bluetooth | No |
Cassette Deck | Yes |
Speakers | 2-Way Bass Reflex |
Set the unit on an even surface away from direct sunlight, high temperatures, humidity, and vibration.
Do not use high voltage power sources or DC power sources to prevent overload or fire.
Ensure correct connection and handling of the AC mains lead to prevent fire or electric shock.
Warnings against metal objects, liquids, and insecticides entering the unit to prevent damage or shock.
Do not attempt self-repair; contact a dealer or service center for any issues.
Step-by-step instructions for safely replacing the fuse in the AC mains plug.
Proper insertion and handling of batteries to prevent leakage, damage, or fire hazards.
Identifies and explains the buttons and indicators on the CD player.
Details the buttons and indicators for operating the cassette deck.
Explains the buttons and display functions for the tuner section.
Describes the buttons and indicators on the amplifier unit.
Explains the functions of buttons on the remote control.
Step-by-step guide to setting the 24-hour clock for accurate timer functions.
How to tune radio stations manually by selecting frequency or band.
How to insert, play, and stop cassettes, select Dolby NR and reverse mode.
How to insert a CD, start playback, stop, pause, and adjust volume.
How to select up to 24 tracks to play in a chosen order.
Steps to take before each recording, including inserting cassettes and setting Dolby NR.
How to tune to a station and record it onto a cassette tape.
How to record an entire CD or selected tracks onto a cassette tape.
Automatically calculates tape length and assigns tracks to cassette sides.
How to set the timer to start playback of a selected source at a specific time.
Solutions for issues like no sound, humming, or error messages.