Technics SC-HD510 - Recording Operations; Recording the Radio; Recording CDs onto Cassette

Recording operations zm
20
RaTS296 | °
Preparation: Do the preparatory steps (m page 19).
1 Tune to the required station.
(™ page 12 or 13)
2 Press [@ REC PAUSE].
The deck goes into the recording standby mode, [@ REC
PAUSE] indicator lights and a play indicator starts flashing.
3 Press [<j] or [>] to start recording.
>: to record on the forward side
<1: to record on the reverse side
To stop recording
Press [I].
To temporarily stop recording
Press [@ REC PAUSE].
The deck goes into recording standby mode.
Press the [<(] or [>] button with the flashing indicator to resume
recording.
B Normal recording
Preparation: Do the preparatory steps (= page 19).
|| Insert a CD.
(™ page 16)
2. Press [<I] or [[>] then [Ill] to set the
tape direction.
D>: to record on the forward side
<]: to record on the reverse side
3 Press [@ REC PAUSE].
The
deck
goes
into
the
recording
standby
mode,
[@
REC
PAUSE] indicator lights and the play indicator starts flashing.
4. Press [[>] on the CD player.
Recording starts automatically.
Four
seconds
after
the
CD
finishes,
the
deck
goes
into
the
recording
standby
mode.
To stop recording
EITHER
Press [Il] on the CD player.
The deck goes into the recording standby mode four seconds later.
OR
Press [I] on the deck.
Recording stops immediately but the CD continues to play.
To record programmed tracks.
Program tracks after step 1 (m step 1 and 2, page 18).