Technics SD-5948 User Manual

to Tia Ba 1d Ber PULL RANGE
PRETO ROETE REFERERS OTRAS SHREHH EE D TOE EEHE
Equalization-preset indicator
.
$
:
t
[5] This curve can be used when making tapes to listen to
through headphones-stereo units.
„erusa
kaasi r 1000 0 eo tite dace (Berm PAL RANGE
[6] This curve can be used when making tapes to listen to
through a car stereo.
Using the graphic equalizer
To retrieve the memorized contents EJ
Press MEMO MODE to select the “MANUAL”
mode.
Press one of the numeric buttons (| - (6) to
select the desired equalization curves.
The corresponding equalization-preset indicator will
illuminate.
For your reference
1. Curves programmed into the memory will be retained for about
two weeks if the AC power supply cord is unplugged. If curves
are erased, they must be programmed again. Note, however,
that curves originally programmed beforehand into the unit's
memory as permanent curves (the “FIXED” curves) will not be
erased.
2. The last position of the EQ level controls (whether in memory or
adjusted manually) will be automatically entered into the
memory when the power is switched OFF. When the power is
switched ON, these positions will be recalled.
To use the second tape deck or VCR connected to
the graphic equalizer
For detailed information concerning tape deck or VCR operation,
please read the operating instructions for each unit carefully.
To start the tape playback
1. Set INPUT SELECTOR of the graphic equalizer to the “TAPE”
position.
2. Start the tape playback.
Be sure to set INPUT SELECTOR to the “SOURCE” position to
listen to other sources.
To record on the tape deck with equalizer correction
This only works for the tape deck, etc., connected to the graphic
equalizer.
Adjusting the sound field and sound quality ||
—
Set EQ REC to the “ON” position.
2. Adjust the tone quality as desired. (See page 42.)
Start recording on the tape deck and then start the desired
source to be recorded.
w

Technics SD-5948 Specifications

General

Brand	Technics
Model	SD-5948
Category	Stereo System
Language	English