/
CD
%
E/
Specified disc number
Specified _ack number
Program play lets you playback your favorite tracks in the sequence
you want to hear them. The program can hold up to 32 steps.
H [In the stop mode]
Press PROGRAM.
Press CD.
This will set the remote control to operate the CD changer.
_J_ Select the disc(s) you want with the numeric
buttons.
For example:
To select disc 3.
DISC _ 3 --_ DISC ENTER
The "ALL" indication shows that all the tracks on the disc are
selected.
To program by means of disc numbers only, repeat the above
operation. (The count will increase by one for each
operation.)
You can select slot No. O.
B Press the numeric button(s) to specify the track.
Forexample:
To selectbackNo. 20
_1o _ 2 --. o
Toprogram anotherbackfromthesamedisc,simplyspecify
the track No.
Repeat steps 3 and 4 until you have completed all
entries.
If you attempt a 33rd selection, the "PGM FULL" indication will
be displayed.
If you enter non-existing disc(s) or track(s), the corresponding
indicator illuminates and the entry is included in the count. In
the play mode, the changer will cancel the non-existing entry.
B Press _ to start play.
To enter additional selections during play, repeat steps 3 and
4.
[In the stop mode]
Press U.
To Next Page
Loading...
