Technics SH-AV22

HSITSNA
You can mix sounds from audio equipment (turntable, tuner or
compact disc player connected to the amplifier or receiver)
with sound of a video source (VCR, TV, video disc player, etc.
connected to this unit) as you watch the video source.
Switch the amplifier or receiver ON, and
prepare it for listening to the sound source.
(Refer
to
page
9.)
A
“on”
(a—
=)
The BGV mixing
Power:
“on”
(
a>
=)
indicator
and
the
Be
sure
to
reduce
the
volume
level
3
“AV
source”
program
source
.
to
the
minimum
(“0”)
position
indicator
(“source”)
before turning on the power.
Program source indicator
0 Adjust the mixing level.
_will illuminate.
BGV mixing indicator
5 Select the
equipment (to be
the mixed sound
source) connected
to this unit.
This unit
8 Adjust the volume level.
If sound volume is insufficient at
the “max” position, increase the
volume level of the connected
er or receiver.
source |] LILI TTT UU LILI 320 oun
ia a Operate each
yo me, component.
Sound Sound (Refer to the operation amplifi
volume level volume level instructions of each
of source of video source component.)
connected connected
to
amplifier
to
this
unit
6
Set
the
volume
control
of
the
connected
amplifier
or
receiver
increases.
or
receiver
to
about
the
middle
position.
increases.
_ Microphone mixing
You can sing along with the desired program source or add
commentary or narration to video sound during playback.
1 Power: “on” ( #— =)
Be sure to reduce the volume
level to the minimum (“0”)
position before turning on
the power.
3 Set the volume control of the
connected amplifier or receiver to
about the middle position.
@
Connect the microphone.
or
Le
Microphone
(Suitable'impedance:
600Q)
(option)
Adjust microphone or—
audio/video source mixing level.
avsouee TIL HIIE me :
Audio/video
~_
£4x£4-2ES
icrophone
sound
6
sound
increases.
at
increases.
Set to “on” to mix BGV-mixed
sound with microphone sound.
(See above.)
Adjust the volume level.
lf sound volume is insufficient at the “max”
position, increase the volume level of the
connected amplifier or receiver.
4
This unit
Operate each
component.
(Refer to the operation
instructions of each
component.)