Technics SL-DL1 Service Manual

SL-DL1
How to remove the arm drive plate and disc size sensor P.C.B.
. Remove the upper cabinet cover. (Refer to ‘How to remove the surface plate and dust cover.’”’)
Remove the disc size sensor P.C.B. setscrew @ and connectors @ , @ . (Fig. 12)
To
remove
the
disc
size
sensor P.C.B.
completely,
remove
the
upper
cabinet
and
the
lead
wire
clamper
setscrews
@
in
Fig. 12.
(Refer
to
‘How
to
remove
the upper
cabinet.”}
4.
Remove
the
arm
drive
rope
from
the
tonearm,
and
remove
the
arm
drive
plate
setscrews
@
~
@).
Then
the
arm
drive
board
can
be
detached.
(Fig.
12)
WNae
| Dise size sonsor P.C.B.
Lead wire
clamper
Fig. 12
® How to remove the tonearm
1. Remove the upper cabinet. (Refer to “How to
remove the upper cabinet.’’)
2. Remove the arm drive plate.
(Refer to “How to remove the arm drive plate and Ds
disc size sensor P.C.B.’’) ee --@
3. Remove the tonearm guide rail setscrew @ and lead @—% Tonearm
wire clamper setscrews @ , @. Then the tonearm
can be removed. (Fig. 13)
PRS?
Fig. 13

Technics SL-DL1 Specifications

General

Brand	Technics
Model	SL-DL1
Category	Turntable
Language	English