Technics SL-PD349 User Manual

When recording, the changer will automatically program the
tracks for tape sides A and B in accordance with the length of the
tape so that none of the tracks will be Interrupted before they are
completed.
In addition, the program wili also include a silent interval of ap¬
proximately 4 seconds between tracks.
Example: Recording from a disc containing seven tracks on¬
to a 60-minute tape.
Silent interval between tracks
(approx. 4 seconds)
Side A (30 min) 1 _
Track 1 I
Track 2 g Track 3 f Track 4
1
Side B (30 min)
Track 5
1 Track 6 | Track 7
Prepare the tape deck for recording.
Set the Dolby NR. reverse mode, recording level,
etc., as instructed in the Operating Instructions for
the tape deck.
Set so that recording is possible from the beginning
of the tape.
Press EDIT GUIDE to select
the tape length.
Each, time you press the button, the
display showing the tape length
changes as follows. Choose the length
of the tape you will use.
p C-46 cO C-60 C-9Q c:> C-1
1 -
L
LI C
1 o
MIN
EXT 11
1 -
Illuminates
r
More precise time settings are also
possible.
(Refer to the instructions at right.)
I I •" ]
Press DISC SKIP to select
the disc to be recorded.
V<:7>
-S
J nsc
mix
UUim - 5«\
The display shows the data of the tracks to be recorded as
follows:
Number of tracks Tracks to be
to be recorded recorded
Specified disc number
In this example, disc 5 can be recorded with tracks 1 - 4 on side
A and tracks 5—7 on side B of the cassette tape.

Technics SL-PD349 Specifications

General

Brand	Technics
Model	SL-PD349
Category	CD Player
Language	English