To Next PageTo Next Page
Need help?Do you have a question about the Technics SL-PD665 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Frequency Response | 2 Hz - 20 kHz |
| Weight | 3.5 kg |
| Digital Output | Optical |
| Dynamic Range | 96dB |
| Output Voltage | 2V |
| Digital-to-Analog Converter | 1-bit DAC |
| Channels | 2 (Stereo) |
Advises that the manual is for experienced technicians and warns against electrical hazards.
Presents circuit diagrams for the Optical Pickup and CD Servo circuits.
Presents circuit diagrams for Optical Pickup and Servo circuits.
Presents the detailed circuit diagram for the servo system.
Lists part numbers, descriptions, and quantities for CD unit components.
Shows the layout of the Servo P.C.B. for new CD units.
Explains how to enter and use the self-diagnostic function to display error codes.
Lists error codes, their probable causes, and correction procedures.
Details precautions for handling the traverse deck to avoid static discharge damage.
Provides step-by-step instructions for disassembling various parts of the unit.
Provides essential safety warnings and precautions regarding the laser diode.
Details essential preparations before moving the unit to prevent damage.
Provides detailed procedures for displaying error codes and troubleshooting.
Illustrates the sequence of automatic adjustments for the digital servo system.
Guides through diagnosing playback issues using a decision-tree flowchart.
Lists required tools and general preparation steps for adjustments.
Details the process for adjusting RF signal and eye pattern using test discs.
Illustrates the functional blocks of the optical pickup and servo amplifier.
Details the functional blocks of the servo processor, digital signal processor, and D/A converter.
Lists replacement parts for integrated circuits, transistors, diodes, and other components.
