EasyManua.ls Logo

Technics SL-PD688

Technics SL-PD688
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Other manuals for Technics SL-PD688

Question and Answer IconNeed help?

Do you have a question about the Technics SL-PD688 and is the answer not in the manual?

Technics SL-PD688 Specifications

General IconGeneral
TypeCD Player
Frequency Response2 Hz - 20 kHz
Signal-to-Noise Ratio100 dB
Total Harmonic Distortion0.004%
Output Level2.0 V
Weight3.5 kg
Channel Separation90 dB
Channels2
Dimensions430 x 100 x 300 mm
Disc Capacity5-Disc Carousel
Digital ConverterMASH 1-bit DAC

Summary

Important Safety Warnings (USA)

Laser Safety Precautions

Advises against opening the unit and highlights potential hazardous radiation exposure.

Electrical Shock Hazard Warning

Instructs to properly insert the plug to prevent electric shock.

Environmental Exposure Warning

Warns against exposing the appliance to water, rain, or moisture to prevent damage.

General Precautions and Setup

Operational Safety Guidelines

Covers power source, polarization, cord protection, and unit non-use.

Audio Connections

System Connection Diagram

Illustrates how to connect the changer to a receiver or amplifier using cables.

Basic Operation: Sequential Play

Sequential Playback Procedure

Step-by-step guide to play all tracks on all loaded discs sequentially.

Loading and Selecting Discs

Instructions on how to load discs and select the first disc for playback.

Advanced Basic Operations

Direct Track Access

How to select and play a specific track using numeric buttons.

Special Playback Modes

Program Playback Function

Programming Track Selections

Guide to programming up to 32 tracks from five discs in a desired order.

Delete Playback Function

Selecting Tracks to Delete

Process for marking unwanted tracks to skip during playback.

Troubleshooting Guide

Common Playback Issues and Solutions

Lists common problems like 'Changer will not play' and their suggested remedies.

Error Messages and Operation Stops

Addresses error messages (-E) and issues with the loading drawer operation.

Related product manuals