Technics SL-PD349 User Manual

Before moving the changer to another location, be sure to carry
out the “Preparations for moving the unit” described beiow.
Faiiure to do so wili expose the compact discs and the changer to
the risk of severe damage.
■ AUDIO
No. of channels
Frequency response
Output voltage
Dynamic range
S/N
Total harmonic distortion
Wow and flutter
DA converter
Output Impedance
Load Impedance
2 (left and right, stereo)
2-20,000 Hz, ±1 dB
2 V (at 0 dB)
92 dB
100 dB
0.007% (1 kHz. 0 dB)
Below measurable limit
MASH (1 bit)
Approx. 1 kQ
More than 10 kQ
■ PICKUP
Wavelength 780 nm
Preparations for moving the unit
AH of the discs must be removed so that the trays are completely
empty.
Use the following procedure.
0 Press POWER to switch off the unit.
0 Press POWER to switch on the unit.
(if there is a disc in the play section, it will be returned to the
disc tray at this time.)
(D Press OPEN/CLOSE to open the loading
drawer.
(S) Press DISC SKIP to rotate the disc trays and
remove the discs from all disc trays.
(D Press OPEN/CLOSE to close the loading
drawer.
(D Press POWER to switch off the unit.
If you have pressed a wrong button by mistake, return to step ®.
OPEN/CLOSE
■ GENERAL
Power consumption
For United Kingdom, Europe, Australia and N.Z. 12
For others 14
Power supply
For United Kingdom, Europe, Australia and N.Z.
AC 50/60 Hz, 230-2210 V
For Others AC 50/60 Hz. 110 V/127 V/220 V/230 - 240 V
Dimensions (W x H x D) 430 x 1 2 5 x 370 mm
Weight 4 6 kg
Note:
Specifications are subject to change without notice.
Weight and dimensions are approximate.
I MASH is a trademark of NTfJ
For United Kingdom
This apparatus was produced to BS 800.
18
5
$

Technics SL-PD349 Specifications

General

Brand	Technics
Model	SL-PD349
Category	CD Player
Language	English