Technics SL-PG340

(continued)
3
2
TIME FADE
TIME FADE
STOP
Time fade indicator
T.FADE
6 8
3
To see the remaining time
T.FADE
-Ai 1 n i I ■ i j H
To cancel the fade mode
16
Special Features
Time fade function ---------
After the fade-out is finished, the unit goes into the pause mode.
The time fade indicator goes out.
jn • nn
JIJ ■ uu
TIME MODE
Press TIME MODE three times in the play mode.
(See page 17.)
TIME MODE
If you want to change the time while entering, press CLEAR to
cancel it.
Press ► PLAY.
The fade-out begins 5 seconds before the specified time.
The time fade indicator flashes on and off.
The time fade function allows the unit to finish the play with fade-out.
You can specify the time (from 5 sec, to 99 min. 59 sec.) when the
fade-out of 5 seconds is finished.
1
Remaining time
Press ■ STOP.
Press SKIP (K<, » ) and TIME FADE to enter
the desired time.
For example: If you want the fade-out to be finished
30 minutes later, follow the procedure de 
scribed as below.
1) Keep pressing SKIP until the display shows “ 3{] ".
Pressing K< SKIP starts the countdown from 99.
2) Press TIME FADE to enter "30".
3) Press »l SKIP to specify " "•
Pressing K< SKIP starts the countdown from 59.
4) Press TIME FADE to enter “ 00".
The time fade indicator on the display panel illuminates.
9 to 11 12
2 3 4 5
Press TIME FADE in the pause or stop mode.
The " — : — ” indication will be shown on the display panel.
2