Technics SL-PG340 - Link Function Example

Side B (30 minutes)
C-60
ODO
5
To cancel the link function
The edit mode will be also cancelled.
23
3 Press TAPE LENGTH twice to select “ C-60 ” .
4 Press DISC LINK.
5 Adjust the recording level on the cassette deck.
6 Press ► PLAY to start recording. 6 Adjust the recording level on the cassette deck.
7 Press ► PLAY to start recording.
If the cassette deck has no synchro edit terminal, the tape will keep
running even after disc play has been completed. Press the stop
button on the cassette deck.
Do not forget to stop the tape and rewind it to the position where the
recording was completed. If the deck is not equipped with an auto
reverse mode, change the tape over to side B when the recording on
side A is finished.
•'HI 1
Disc 3
Press ■ STOP after recording has finished.
STOF^ — j
| Recording for disc 3 |
1 After recording is completed, press A OPEN/CLOSE.
2 Replace disc 2 with disc 3.
3 Press A OPEN/CLOSE again.
4 Press CLEAR until the display shows “ 0 ” .
5 Enter the track number.
In this example:
Tracks 4 — >5 — >1
Note:
The "0" may appear on the track display after you replace the disc.
This means that the first track on that disc is longer than the remain 
ing space of the tape.
In this case, press ■ STOP to cancel the edit mode.
| Recording for disc 2 |
1 After recording is completed, press A OPEN/CLOSE.
2 Replace disc 1 with disc 2.
3 Press A OPEN/CLOSE again.
The unit automatically programs tracks on the remaining space
and the display shows the number of tracks to be recorded, in
normal sequence.
4 Press CLEAR to cancel the tracks automatically pro 
grammed.
Press the button repeatedly until the display shows “ 0"
5 Enter the track number for side A.
In this example:
T rack 2
6 Press SIDE A/B to switch the display.
7 Press CLEAR to cancel the tracks automatically pro 
grammed.
8 Enter the track number for side B.
In this example:
Tracks 9-> 6
9 Adjust the recording level on the cassette deck.
10 Press ► PLAY to start recording.
[ Recording for disc 1 |
1 Prepare the cassette deck for recording.
2 Enter the desired track number in desired sequence.
In this example:
Tracks 3 — >10 — >7-
3 I 10 I 7 I 5
Disc 1
t __
1 9 1 6
Disc 2
Example:
Recording the desired tracks from 3 discs on 60 minute tape
Side A (30 minutes)
2