To watch TV broadcasts
The explanations below are examples of operation in the case
where a TV and VCR have been connected according to the
method given on page 9 of the operating instructions for the system
components.
For detailed information concerning TV or VCR operation, please
read the operating instructions for each unit carefully.
POWER AUDIC4
_dc_6
_5666_
I_ • II @D/VDP
OD5 -" -"oo
MU'ilNG -- VOLUME J,
ID {ZZDI-----I
To watch TV broadcasts with iust a TV
Facing toward the TV Facing toward the TV Facing toward the
amplifier
POWER TV/
Switch ON the Set the TVNIDEO
power for "rv. mode on the TV to
"TV".
J
Facing toward the TV
c.^ ©6_
0
or ©_
CHv
Select the desired channel.
To watch TV broadcasts with a VCR tuner
Set the input
selector on the
VCR to the
"TUNER"
)oaition
Facing toward the TV Facing toward the VCR Facing toward the TV
POWER POWER
Switch ON the Switch ON the Set the TVNIDEO
power for TV. power for VCR. mode on the TV
to "VIDEO".
Facing towardOcH^the orVCR (_ (_(_(_ (_ (_) _llamplifierFacingvcnlt°wardthe_
CHv
CD ©cb©cb
Select the dealred channel.
To switch OFF the power for TV
POWER
To switch OFF the powerfor VCR
POWER
r-ANT
TVNCR
How to use the antenna input selection button
Each time the button is pressed, the antenna input at the VCR changes from "TV_ to
"VCR" and vice versa.
•'=' This button is used when using ENTER to select a channel on a "IV or VCR which
0 has not been manufactured by this company.
5
To Next Page
Loading...
Need help?
General
