To watch video tapes/To record video/audio sources on the VCR
The explanations below are examples of operation in the case
where a TV and VCR have been connected according to the
method given on page 9 of the operating instructions for the system
components.
For detailed information concerning TV or VCR operation, please
read the operating instructions for each unit carefully.
POWER AUDI"__
T
O
TV/
m
CH A _ 10/
o666
CHv
.*.M.IM
oo
--_+ --St jflROUN0_F
c:D c-- KD C_ KD
TAPE
VCR
c cbc
cbd €]6c
m
_ J
To watch video tapes
Facing toward the TV Facing toward the VCR
POWER POWER
Switch ON the Switch ON the
power for TV. power for VCR.
Facing toward the TV Facing toward the
amplifier
TV/
VIDEO VCR1
Set the TVNIDEO
mode on the TV to J_
"v"
"VIDEO".
Facingtowardthe VCR
_ Playback will begin.
In the stop mode
To fast-forward or
rewind the video tape [_ (_
To stop playback II
temporarily (_ Press once again to resume playback.
TO stop playback
5
To record video/audio sources on the VCR
Select the Input source
to be recorded
Recording from the tape
deck is not possible.
AUDIO/
TV/VCR2 TUNER CD
Start the selected
I_ source.
Facing toward the VCR
CDCD
Press these buttons
simultaneously.
(Recording will begin.)
To stop recording II
_) Press once again to resume recording.
temporarily
To stop recording
To switch OFF the power for TV
POWER
To switch OFF the power for VCR
POWER
6
To Next Page
Loading...
Need help?
General
