Need help?Do you have a question about the Technics SV-DA10 and is the answer not in the manual?
General| Sampling Frequency | 48 kHz, 44.1 kHz, 32 kHz |
|---|---|
| Signal-to-Noise Ratio | 92 dB |
| Dynamic Range | 92 dB |
| Weight | 4.5 kg |
| Type | Digital Tape Deck |
| Recording Time | 120 minutes (SP), 240 minutes (LP) with 120-minute tape |
| Frequency Response | 2 Hz to 22 kHz (48 kHz sampling) |
| Digital Inputs | Optical, Coaxial |
| Digital Outputs | Optical, Coaxial |
| Analog Inputs | RCA line input |
| Analog Outputs | RCA line output |
| Dimensions | 430 mm |
| Tape Speed | 8.15 mm/s (SP), 4.075 mm/s (LP) |
| Heads | 4 (Record, Playback, Erase) |
Notes on where to place the unit for optimal performance and safety.
Procedure for cleaning the DAT heads and transport mechanism.
Details for connecting audio equipment via optical and digital inputs/outputs.
How to set the input selector and precautions for digital output.
Guidelines for effective operation and signal reception.
Identification and function of front panel controls numbered 1 through 10.
Identification and function of front panel controls numbered 11 through 24.
Identification and function of front panel controls numbered 25 through 34.
Explanation of various indicators on the display panel.
Functions of buttons for playback and program selection on the remote.
Steps for starting, pausing, resuming, and stopping operations.
Using fast-forward, rewind, and search functions.
Steps to start tape playback from the beginning.
Steps for making analog recordings.
How to erase recorded content from a tape.
Steps for setting up timer recording.
Steps for setting up timer playback.
Explanation of the Serial Copy Management System (SCMS).
Key features of the MASH-type 1-bit Analog-to-Digital/Digital-to-Analog converter unit.
To Next Page
