Need help?Do you have a question about the Technics RS-640US and is the answer not in the manual?
Adjusts the unit's voltage setting to match local power supply by using the selector.
Specifies voltage ranges for different regions to ensure correct operation.
Instructions on handling cassette tapes, including tape looseness and tape types.
Procedures for cleaning the tape head assembly and other parts.
Guidelines for horizontal operation, location, and power source frequency.
Details on voltage tolerance and its impact on performance.
Emphasizes regular head assembly cleaning for good tape recorder performance.
Warning against pulling tape from cassette openings to prevent damage.
Caution against manual reel turning to prevent tape looseness.
Advises against using C-120 tapes due to potential breakage or stretching.
Recommends avoiding storage in places with high temperature and humidity.
Suggests fast forwarding and rewinding for tightly wound or uneven tapes.
Provides important guidelines for connecting the deck to audio equipment.
Important notes on Dolby playback and output level control.
Details on Dolby NR switch, tape selector, and equipment connection.
Guidance on adjusting recording levels using meters and controls.
Instructions for making 'mix' recordings from multiple sources.
How to adjust recording levels using the PEAK-SIGNAL-CHECK switch.
Explains how the switch affects meter indication accuracy.
Steps for setting up FM broadcasts recording using a timer.
Explains how the tape selector optimizes performance for different tape types.
Details the function of the TAPE-END lamp and its variations.
Describes useful applications of the Memory Rewind system.
Step-by-step instructions for utilizing the Memory Rewind function.
To Next Page
General
