Need help?Do you have a question about the Technics RS-B100 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Heads | 1 x record/playback, 1 x erase |
| Noise Reduction | Dolby B, Dolby C |
| Frequency Response (Normal Tape) | 20 Hz - 18 kHz |
| Wow and Flutter | 0.07% WRMS |
| Tape Speed | 4.8 cm/s |
| Weight | 5.5 kg |
| Type | Cassette Deck |
| Motor | DC servo |
| Tape Type | Type I, CrO2, Metal |
| Frequency Response | 20 Hz - 20 kHz |
| Input | Line |
| Input Sensitivity/Impedance | 100mV (line) / 47kOhms |
| Output | Line |
| Dimensions | 430 x 132 x 310 mm |
| Power Supply | 220V |
Adjusts head azimuth, output balance, and phase for optimal performance.
Tunes tape speed, playback frequency response, and playback gain.
Adjusts LINE IN, erase current, and overall frequency response.
Adjusts overall gain, dbx gain, attack recovery, and Dolby NR circuit.
Calibrates test oscillator, fluorescent meter, motors, and micro-computer clock.
Layout of Main, NR Decoder, and NR Encoder circuit boards.
Layout of AC Power, DD Motor, and Hall IC circuit boards.
Layout of Input Level, Volume, Headphones, and FL Meter circuit boards.
To Next Page
